Brakes are straightforward to use, but they are essential to all cars. Aside from their capacity to prevent vehicular accidents, brakes when adequately maintained can enhance performance and improve their longevity. You must not take it for granted to ensure that your car’s brakes are in tip-top condition. The following are some maintenance tips for your Hyundai Brakes or any car brake to last longer.
Make sure your brake fluid is at the recommended level.
Do you know where the car brake’s oil reservoir is located? The reservoir has clear level marks. It is your responsibility to make sure that the reservoir is filled to the recommended level. The brake fluid you use must be the right one too. You can find a lot of brake fluids in the market, but you must use what’s recommended by the car manufacturer.
Change your brake fluid.
It’s important that you change your brake fluid every two years or after 2,500 miles. Contaminated brake fluid has a low boiling point. This has a negative effect on the braking system. Remember that brake fluid is prone to moisture, which results in the corrosion of the braking system’s metal components.
Inspect brake pads and replace them when needed.
The brake pads are the most abused part of a car. They become thin over time due to the heat produced during braking. Brake pads have to be uniform whether they are worn out or new. They have to be at least 5 millimeters thick. This is why you have to inspect your Hyundai brakes and their pads regularly. You also need to replace the pads regularly.
Always follow the three-second rule.
The three-second rule maintains a safe distance from your car to the one ahead. This prevents unnecessary braking and possible car crashes. A car driver has to maintain a three-second worth of space between them and the car in front. This is a rule for defensive driving, but it also allows a safe distance. Plus, this is also easy on your car brakes.
Speed makes the brakes suffer.
A major cause of brake pad wearing is abrupt braking from high speed. Imagine running at 140 mph and going to a full stop. The brakes will spend more energy than what is often required. This often causes premature brake wear. The best thing to do is to slow down first before you stop. Once you see a stop sign, lift your foot off the gas pedal right away. This will prolong the lifespan of your brakes.